A receiver is always that large, heavy factor that you just plug your sound system together with other components into (as being a DVD player, TV, Compact disk player, Xbox 360, Ps, ipod device, and etc.). It's the "brain" in the show, really. The idea of connecting up all your components to home theater receivers is the thought of audio/video switching, enabling you to definitely certainly switch to different video sources (like TV, DVD, camcorder) inside your TV and for that reason changing the audio source accordingly - all without touching not the receiver.
Of course, the main purpose behind audio/video switching with a receiver is to drive audio to external speakers, like surround sound or stereo speakers.
Most devices have an array of inputs as much as 8 loudspeakers along with a subwoofer (more generally, 5.1, or five loudspeakers along with a subwoofer), several video inputs, as well as High-definition multimedia interface inputs. You can plug your Xbox 360, Plasma, and DVD player in to the receiver and employ one remote to change between all of the different video sources (games, TV, DVD video) and also have your loudspeakers generate surround-seem.
Let's start with inputs and outputs. If you don't understand something, read through the entire How-To as most of it will be explained in detail.
Keep in mind the receiver might be the hub from the entire home theatre, and this How-To will truly demonstrate using the basic principles of connecting your complete home theatre.
What exactly it's this 'stuff' around the rear of the receiver?
I will discuss nearly something that you'd find around the rear of the receiver. The primary one I'm basing the following information from can be a Harman Kardon AVR-247 I'm likely to start with the most effective left in the unit and work my way right, then I'll begin in the left in the next row and so on.
The first three inputs are for antennas. An FM antenna cable would slide on to the first jack while two speaker wires would plug into the remaining slots for AM. Of course, you don't have to plug your antennas in, but if you'd like AM/FM reception through your speakers, you'll want to go ahead and do that. These are standard connections, so if you lose one of your antennas, just go buy another for a few bucks.
You've probably learned about composite video. Its a very fundamental video connection employed by almost all component (TV, DVD, VCR especially). Its common which is cheap. Consequently, its suprisingly low quality.
Composite uses an RCA cable for video (yellow) and two more RCA cables for audio (red and white, stereo). The problem is that a composite video cable combines luminance and chrominance in the same cable, reducing the quality of the picture. You lose a lot of sharpness, and the color begins to degrade from the original source. Its useful when you need the extra input or the device you're connecting only has composite video. Otherwise, use something else, like component video. Sounds similar; very different.
Of course, the main purpose behind audio/video switching with a receiver is to drive audio to external speakers, like surround sound or stereo speakers.
Most devices have an array of inputs as much as 8 loudspeakers along with a subwoofer (more generally, 5.1, or five loudspeakers along with a subwoofer), several video inputs, as well as High-definition multimedia interface inputs. You can plug your Xbox 360, Plasma, and DVD player in to the receiver and employ one remote to change between all of the different video sources (games, TV, DVD video) and also have your loudspeakers generate surround-seem.
Let's start with inputs and outputs. If you don't understand something, read through the entire How-To as most of it will be explained in detail.
Keep in mind the receiver might be the hub from the entire home theatre, and this How-To will truly demonstrate using the basic principles of connecting your complete home theatre.
What exactly it's this 'stuff' around the rear of the receiver?
I will discuss nearly something that you'd find around the rear of the receiver. The primary one I'm basing the following information from can be a Harman Kardon AVR-247 I'm likely to start with the most effective left in the unit and work my way right, then I'll begin in the left in the next row and so on.
The first three inputs are for antennas. An FM antenna cable would slide on to the first jack while two speaker wires would plug into the remaining slots for AM. Of course, you don't have to plug your antennas in, but if you'd like AM/FM reception through your speakers, you'll want to go ahead and do that. These are standard connections, so if you lose one of your antennas, just go buy another for a few bucks.
You've probably learned about composite video. Its a very fundamental video connection employed by almost all component (TV, DVD, VCR especially). Its common which is cheap. Consequently, its suprisingly low quality.
Composite uses an RCA cable for video (yellow) and two more RCA cables for audio (red and white, stereo). The problem is that a composite video cable combines luminance and chrominance in the same cable, reducing the quality of the picture. You lose a lot of sharpness, and the color begins to degrade from the original source. Its useful when you need the extra input or the device you're connecting only has composite video. Otherwise, use something else, like component video. Sounds similar; very different.